For a change, we left our stump grinder at home today. There wasn't enough room for a stump grinder and a sweat wouldn't hurt either. So tackle the stump with a sharp spade, good sharp axes and a large reciprocating saw. Step 1 was to dig out as much of the stump as possible, until it was under the stump. Then cut through the thicker side roots with a good ax and saw through all the thinner branches with the reciprocating saw. After a lot of sweating we succeeded. The stump gave in. It's a lot more work than removing a stump with a tree stump grinder, but you no longer have to go to the gym. That makes a difference :-)
The situation we found. The remains of a currant tree. It doesn't seem like much, but as you get closer it gets bigger and bigger, and so does the stump.
Dig, dig and dig again. A strong spade with which you can pry well is necessary for this. You really have to dig under the stump.
We dug deep all the way around the stump. Dig deep. Until under the stump. We managed to cut through the many thick roots (carefully!) with a sharp axe. Fortunately, the stump was free at the time and could be removed. This method of stump removal is only possible with smaller tree stumps that a stump grinder cannot reach.
Photos from this project