Tree pruning.

Problem strain removed

Problem strain removed

Today was another nice day. No rain :-). a nice customer who helped very well, a happy neighbor, a crooked tree that hung over the neighbor's shed, and everything was taken down in small parts. It was a winding willow. Two tribes. The rear trunk hung over the neighbor's shed and that is of course not very convenient. Fortunately, the front trunk was fairly straight and I was able to attach my "top anchor" for my climbing rope in it and from there saw off the crooked trunk into small parts from top to bottom. With the right sawing techniques I can "steer" the fall of a branch in the direction of the fall spot. Once the branches have been removed from the trunk, I can saw the trunk into small pieces and lower it in a controlled manner on a rope or let it land on the fall site. Below are a few photos and a video.

Because I climbed the tree with climbing spurs, and the lower part of the tree remained standing, I couldn't damage the lower part with my climbing spurs. That's why I bridged the first part with a ladder. Then I could just climb up the tree with climbing spurs and a flip line.

First I tied my climbing rope at the top of the straight trunk. Then I could easily climb the trunk that sloped backwards. This way, this "problem trunk" could easily be worked down in parts. The white rope at the front of the photo is to carefully lower the branches and trunk parts of the rear trunk.

Watch on YouTube

The top of the front trunk is sawn off and falls to the ground in exactly the right place between two trees.

Photos from this project

← Back to all projects

💬