Japanese Cedar felled in Zaandam

Cut down a Japanese Cedar (cypress family) today. This tree grew very large and was much too big for the position/growth location. The felling plan was to use climbing techniques to 1) first remove all branches on the house side so that

Cut down a Japanese Cedar (cypress family) today. This tree grew very large and was much too big for the position/growth location. The felling plan was to use climbing techniques 1) to first remove all branches on the house side so that the center of gravity would be on the street side. 2) Cut off the top and middle and drop it and drop the bottom from the ground. Tested the new leaf blower (5.5 hp) and it is a beast! At full power it easily blows away larger decorative stones! The front garden was completely blown clean, swept and removed. Very happy with this (heavy) leaf blower. This way the delivery of the workplace can be beautiful :-)

Watch on YouTube
Watch on YouTube
Watch on YouTube

After the top has been removed, I climb to the middle section to drop it in a controlled and precise manner

The Japanese Cedar in a spot that is too small.

First climb up to remove all branches on the house side. This brings the center of gravity above the road. Where the parts can stand out.

Cutting down a tree into parts using climbing techniquess. In this case I used two flip lines. When sawing (hand or chainsaw), it is advisable to be secured at least twice.

Climb quietly and safely. Trousers and helmet are mandatory. A light chainsaw especially for use in the tree makes everything even safer.

Photos from this project

← Back to all projects

💬