Trimmed a birch today
This tree took away a lot of sunlight, had not been maintained for a long time and the shape had also become very irregular. There were branches sticking out here and there. The assignment was to lighten the crown, do maintenance pruning and take in the crown.
The tree was carefully pruned using climbing techniquess and a Silky (very sharp) handsaw. Of course, no climbing tracks were used. That would damage the tree too much. Thicker branches are first sawn off further from the trunk and then close to the trunk, but outside the branch collar for best wound healing.
Two "open" wounds were found halfway up the tree, see photos below. Probably caused by incorrect pruning in the past, which left a stump that subsequently rotted away, causing an "open" wound.
Open wound due to the removal of overly large branches from a birch.
Rotted wound. This is the result of sawing off branches that are too thick from a birch.
During pruning, the tree was viewed from the ground several times and assessed for shape before further pruning took place. Finally, a final inspection was carried out together with the customer to ensure everything was as desired and satisfied. A number of thin branches were then cut away with pole shears. This way, a tree can be "cut and shaved" completely into the desired shape.
Light again and room to grow again. The birch can now grow well again closer to the trunk next spring.
After a significant crown reduction and overdue maintenance, a tree looks very bare and "bare", but there is now enough light and space for this birch to grow beautifully again in the spring. Spoke to several neighbors who were all happy with the pruning because of the light.
All pruning waste in the bus. And of course finally sweep everything up nicely again and take it away in garbage bags. Our motto: good riddance :-) Update: we now have a completely different bus and a large trailer and chipper. That saves a lot of manual work :-)
Photos from this project