2 bulb catalpas cut down, roots removed.
These two ball catalpas have been here for about 5 years. The white dots in the soil are the stumps of boxwood bushes.
They were there for about 5 years and a box hedge was planted around and underneath. The owner had already removed the boxwood hedge, but the many stumps of the boxwood shrubs were still there. As a result, a large part of this job was removing the box tree stumps.
Many boxwood stumps rooted through this bed. With a razor-sharp spade, the cutting went very well.
Small trees can have big roots...
We placed these in our van and disposed of them properly. Just like the two ball catalpas. The roots of the ball catalpas had grown considerably, but we were equipped with a sharply sharpened spade with which we could still stick out the ball catalpas all around by jumping with our entire weight on the spade. The crowns and stump were separated from the trunk with the small chainsaw. Even though this happened quickly, we of course used protective chainsaw clothing and a helmet with hearing protection. Because chainsaws are extremely dangerous and an accident can easily happen. Unfortunately, chainsaw accidents still happen to the best and most experienced chainsawers.
The stumps and tree remains in the van ready to be removed. Update: we now have a large trailer and branch chipper. That works a bit more efficiently :-)
Cleaning after removing trees
Sprayed the terrace clean.
Because the front garden in which the ball catalpas were located was beautifully tiled with anthracite-colored tiles measuring 60x60cm, we sprayed everything neatly clean with the garden hose at the end of the job. This way the situation was left even better than we found it.
Sprayed the terrace clean. Tidy and tidy.
These bolcatalpas did not require a permit. If these ball catalpas had been located in a municipality where a felling permit (environmental permit for tree felling/felling of timber stands) still exists, the trees would probably still be outside the permit requirement due to the small trunk size at a height of 1.3 meters. You can check for yourself whether your tree requires a permit for felling via the Online Environment Desk. Click on the image below:
The Environmental Act
Pursuant to the Environmental Act, it is prohibited to disturb native species of bird nests (including in adjacent trees) or to remove them, for example by tree felling. When inspecting this tree, no breeding birds were found and no year-round protected nests of birds of prey, for example. This means that the felling of this tree complied with the Nature Conservation Act.
Another tree cut down and neatly cleaned up by Tree Care and Removal :-)
Photos from this project